You Need
Joy Cable
Known Issues:
Issue
I'm having difficulty setting up my Joy Cable.
Solution
Make sure you've installed the Sensory Switch Driver that came with the Joy Cable. Start the software by going through your Start menu --> All Programs --> Sensory Software and selecting switch driver. When this is running, you should see a yellow symbol in the bottom right hand corner of your screen (on the task bar). Double click the symbol. The switch driver settings should now appear on your screen.
Plug your Joy Cable in and make sure the 'Preset' field is set to 'Space & Enter'... also ensuring the 'Auto-select preset' box is unticked (as shown in the pic). If you plug your switches into the joy cable, you should now see the 1 and 2 images turn blue as you press the switch.
If you close this window now, you'll notice the icon in the bottom corner (now blue and yellow, not just yellow) stays there. You should now be able to use both switches with the software.
If you encounter any problems with this program please contact Inclusive Support.