LITTLE Step-by-Step

Like the LITTLEmack but allows a series of messages which the user can step through in sequence. Theoretically there can be up to 45 messages totalling 75 seconds. Formerly known as Step-by-Step.

Features:

• One-shot timer prevents message repetition when a user continually activates a switch
• 75 seconds of recording time
• FREE toy/appliance cable
• FREE Snap Switch Cap
• 2.5" message area
• EASY to record
• Angled base for easy access

Step-by Step with Levels

Like the LITTLE Step-by-Step, but allows up to three selectable sets or ‘levels’ of messages. These can be on separate themes, for different activities or times of the day. FREE Snap Switch Cap and toy/appliance cable.

Toy/Appliance Jack

This enables the user to control a battery- or electrically-operated toy or appliance allowing voice output to be paired with an activity. The cable, which is included, has a 1/8" (3.5mm) plug on both ends. One end is plugged into the Communicator Toy/Appliance Jack (TOY/APPL.) and the other into a battery device adapter, a Switch Latch and Timer, or a control unit such a PowerLink 3.

The Toy/Appliance Jack operates only when a message has been recorded into the Communicator and will activate the item only while the message is played.

Activating battery-operated devices
A battery-operated toy or appliance may be attached directly to Communicators via a battery device adapter. Using this direct connection, the toy or appliance will be activated for the length of the message. If you wish to extend the action beyond the length of the message, simply connect the Toy/Appliance Jack to a Switch Latch and Timer and choose the Latch or Timed mode of control.

Activating Electrical Devices via PowerLink 3 Control Unit
When you want to use a Communicator to activate, and comment about, an electrically-operated appliance, toy or game, connect it to a PowerLink 3 control unit (or another control unit) by plugging the cable into the switch input jack on the control unit.

Using external switches
Anyswitch with a 1/8" (3.5mm) plug or 1/8 " mono plug adapter can be used to activate the Communicators by plugging it into the external Switch jack on the side of them. The user will then be able to activate them with either the external switch or the surface of the Communicator.

Available in red, blue, green, yellow and black. Please state colour when ordering.

More information about the switches that we sell